← Guided tour
Guided example
Explore the demo network
Follow a device from its site and profile to interfaces, monitoring and support.
Demo data — simulated, read-only. These devices, addresses, measurements and incidents are fictional examples. Nothing here is saved to your inventory or sent to a collector.
Select a sample device
Compare a switch with an uplink incident, a router with working links, and a server with a memory warning.
Selected demo device
Demo Blantyre Core Switch
- Site
- Demo Blantyre Office
- Network / VRF
- Office LAN
- Management IP
- 192.0.2.10
- Hostname
- core-switch.demo.example
- Manufacturer
- Cisco
- Model
- Catalyst 9200
- Software
- Example firmware
- Profile
- Network device — ports & traffic (SNMP)
How the pieces connect
- Demo Blantyre Office groups the device with its location.
- Office LAN identifies the address network / VRF.
- Network device — ports & traffic (SNMP) defines which information to request.
- Demo Office Collector uses approved read-only access to collect it.
- Incoming observations populate interface views; rules can open incidents for support.
Example traffic
42 Mbit/s
Simulated demo value
Example CPU
Unavailable in this profile
Simulated demo value
Example memory
Unavailable in this profile
Simulated demo value
Demo interfaces
Example link states and traffic; no actual observations or network checks were performed.
| Port | Connected to | Link | Speed | Example traffic |
|---|---|---|---|---|
| Gi1/0/1 | WAN uplink | Down | 1 Gbit/s | 0 Mbit/s |
| Gi1/0/2 | Server connection | Up | 1 Gbit/s | 42 Mbit/s |
Demo support workflow
WAN uplink stopped responding
Check uplink power, cabling and the neighbouring router. Acknowledge the incident while investigating; close it only after recovery is observed.
In real monitoring, unsupported or missing data is shown as unavailable. These sample values do not certify hardware support.