← Guided tour
Guided example
Explore the demo network
Follow a device from its site and profile to interfaces, monitoring and support.
Demo data — simulated, read-only. These devices, addresses, measurements and incidents are fictional examples. Nothing here is saved to your inventory or sent to a collector.
Select a sample device
Compare a switch with an uplink incident, a router with working links, and a server with a memory warning.
Selected demo device
Demo Lilongwe Edge Router
- Site
- Demo Lilongwe Branch
- Network / VRF
- Branch WAN
- Management IP
- 198.51.100.1
- Hostname
- edge-router.demo.example
- Manufacturer
- MikroTik
- Model
- CCR2004
- Software
- Example firmware
- Profile
- Network device — ports & traffic (SNMP)
How the pieces connect
- Demo Lilongwe Branch groups the device with its location.
- Branch WAN identifies the address network / VRF.
- Network device — ports & traffic (SNMP) defines which information to request.
- Demo Branch Collector uses approved read-only access to collect it.
- Incoming observations populate interface views; rules can open incidents for support.
Example traffic
18 Mbit/s
Simulated demo value
Example CPU
Unavailable in this profile
Simulated demo value
Example memory
Unavailable in this profile
Simulated demo value
Demo interfaces
Example link states and traffic; no actual observations or network checks were performed.
| Port | Connected to | Link | Speed | Example traffic |
|---|---|---|---|---|
| ether1 | ISP connection | Up | 1 Gbit/s | 18 Mbit/s |
| ether2 | Branch LAN | Up | 1 Gbit/s | 12 Mbit/s |
Demo support workflow
No incident in this sample scenario
Review port traffic and link status. Choose a separate BGP profile if you need BGP neighbour information and your router exposes the required MIB.
In real monitoring, unsupported or missing data is shown as unavailable. These sample values do not certify hardware support.